29ers or two-niners are mountain bikes and hybrid bikes that are built to use 700c or 622 mm ISO (inside rim diameter) wheels, commonly called 29" wheels. Most mountain bikes use ISO 559 mm wheels, commonly called 26" wheels. The ISO 622 mm wheel is typically also used for road-racing, trekking, cyclo-cross, touring and hybrid bicycles. In some countries, mainly in Continental Europe, ISO 622 mm wheels are commonly called 28" wheels or "28 Incher".
Maps, Directions, and Place Reviews
Origins
29er rims have a diameter of approximately 622 millimetres (24.5 in) and the average 29" mountain bike tire is (in ISO notation) 59-622 - corresponding to an outside diameter of about 29.15 inches (740 mm). The typical 26" MTB tire has a rim diameter of 559 millimetres (22.0 in) and an outside tire diameter of about 26 inches (660 mm).
In the early 1980s, the size of the wheels for the emerging mountain bikes was undecided. So when English off-road cycling pioneer Geoff Apps contacted Gary Fisher and Charlie Kelly with news that he had built a prototype off-road bicycle that used large-diameter 28 x 1¾ (ISO 47-622), 47mm wide Nokian Hakkapeliitta snow tires from Finland, they were intrigued. In a letter to the December 2006 issue of Bike Biz magazine, Gary Fisher, speaking about the growing popularity of 29ers, gives his perspective: "We got some tires from Geoff Apps really early on and we [Fisher and Kelly] said 'Holy Toledo!'" But the poor supply situation of the larger diameter tires meant the fledgling MTB industry stuck with the smaller wheel size." The first Geoff Apps-designed 700C wheeled off-road bicycle was made in 1981.
However the bicycle marketed as the Aventura by Apps' own company, Cleland Cycles Ltd, between 1982 and 1984 used the more readily available Nokian Hakkapeliitta 26 × 2 (ISO 54-584). The 650B size, also known as 27.5", reappeared in 2007 as a compromise between the 26 inch and 29 inch sizes. The 650B size is called 26", and there are several 26" tire diameters but is also known as 27.5" in 57mm and above tire widths.
The name "29er" comes from a bicycle called the Two Niner, which was offered by the Fisher bike company in 2001, according to 1998 Mountain Bike Hall of Fame inductee Don Cook.
The US division of Bianchi Bicycles offered a line of 29" wheeled off-road bikes beginning in 1991 called the Project bikes. Their 1992 product catalog raved about the advantages of the larger wheels and showed three different bikes, the Project 3, 5 and 7. The original company Klein produced a small quantity of a 29" wheeled version of their successful "Attitude" MTB racer, and named it the Adept. It failed to find a market and was discontinued. In the mid-1990s, Diamondback Bicycles made their Overdrive bike, and Specialized made their Crossroads bike with 700C wheels, but they were actually hybrid bicycles with frame and fork clearance for larger tires. The Project and Overdrive bikes were not a success for many reasons, primarily a lack of proper off-road tires and suspension forks competitive with the 26" offerings of the time.
A key product release, the first true 29" tire, was produced by an early supporter of the 29" movement Wilderness Trail Bikes. The company introduced the first true 29" tire, the Nanoraptor, in 1999. At about the same time, White Brothers produced the first commercially available 29" suspension forks. Before then suspension forks used were forks designed for trekking bikes or hybrids. For many years, 29" frames and bikes were usually only available from small little-known manufactures like Niner Bikes. Surly Bikes introduced their 29" frameset, the Karate Monkey, in 2002. Gary Fisher Bicycles, a division of Trek Bicycles, became the first of the major manufactures to offer a line of 29" bikes. Their lines never sold well until the introduction of single-speed 29" bike the Rig, in 2004. Today, most bicycle manufacturers in the US market offer at least one 29" bicycle or frame. Even companies that openly dismissed 29" as a bad idea or passing trend, Specialized and Turner, are bringing 29" wheels to market.
Fishers Tires Video
Cyclocross comparison
A tire with a tread width of less than 2.0 in (51 mm) in width is sometimes considered a cyclocross tire by 29" enthusiasts, even though in cyclocross any tire wider than 1.5 in (38 mm) is not a cyclocross tire. Although they are both intended for off road use, and typically use a 622 mm rim, cyclocross bikes and 29" wheeled MTBs differ in their basic handling and geometry, construction methods, durability, and intended lifespan. Bikes exist that blur the distinction by combining attributes of both, however. One example of this is a Monstercross bike, often using a standard mountain bike frame intended for use with 26" wheels with 700c wheels and 700 x 38c-45c tires, disc or cantilever brakes, MTB or cross gearing, and the drop bars of a cyclocross bike.
Performance
The advantages and disadvantages of 29ers are often debated in the mountain bike community. Disadvantages of the 29" wheel include added weight, perceived sluggishness in handling, and problems with fit (specifically, front wheel/toe overlap and high standover height). Advantages include reduced rolling resistance, perceived increased stability while retaining quick handling, and an enhanced ability to roll over obstacles.
One item that is often raised is tire contact patch size and shape. All else being equal, such as tire width, rim width, inflation pressure and rider weight, the contact patch of a 29" wheel has the same area and is slightly longer (~5%) than that of a 26" wheel.
Advantages
- Larger wheels roll over obstacles more easily. The ability of a wheel to roll over obstacles is proportional to its size. A 29" wheel, which is about 10% larger than a 26" wheel, can roll over 10% larger obstacles.
- The larger diameter wheels have more angular momentum so they lose less speed to obstacles and rough sections but the same effect can be achieved with larger tires.
- 29" bikes tend to offer taller riders a more "natural" frame geometry
Most of these claims have yet to be objectively investigated. Small scale, unpublished studies (including one done by Pepperdine University, reportedly at the request of Gary Fisher) exist but both proponents and detractors of 29" wheels are generally unimpressed with their scientific rigor. Long debates over how to conduct a "fair" test of the efficiency of 29" vs 26" mountain bikes have raged online, but no serious efforts have been made to conduct a large-scale, scientific study.
Drawbacks
- Increased wheel size, to keep an identical geometry stack size, results in reduced suspension travel. Each millimeter added to the wheel size needs to be deducted from the travel. Many 29er bike producers try to minimize this effect by increasing stack size. The same approach would allow 26ers to have even more travel.
- Increased wheel weight and rotating mass (spokes, rim, and tire are all larger) makes the wheels harder to accelerate and harder to brake.
- More force needed to change steering angle due to greater mass and longer contact patch.
- Longer spokes and decreased angle between hub flange and rim result in a more laterally flexible wheel (ceteris paribus).
- Smaller riders (i.e., less than 5'5" (=165 cm) tall) may not be able to find a 29" bike with a geometry suitable for them. Examples exist of custom bikes built for very small riders with 29" wheels, but in many cases smaller riders face significant geometry tradeoffs, especially with regard to toe overlap, handlebar height, and standover height.
96 or 69 variations
One variation is to have a 29" front wheel and a 26" rear wheel (commonly called a "96er"). Using the smaller rear wheel allows shorter and quicker handling frames, more options for rear suspension designs and lighter bicycle weight. Another variation is to have a 26" front wheel with a 29" rear wheel (commonly called a "69er" though Trek introduced a "69er" in 2007 with a 29" front wheel and a 26" rear wheel).
Source of the article : Wikipedia
EmoticonEmoticon